|
Post by Simon66Coupe on Jun 12, 2006 12:19:05 GMT
Does anyone know whether the Front engine mounts on a 66 are the same as the engine mounts when the engine is installed on a renault, ? I need a pair and the Renault Item may be a little easier to locate if they are the same.
Or are the Volvo 340 ones the same ?
Thanks Simon.
|
|
|
Post by Simon66Coupe on Jun 19, 2006 12:15:06 GMT
Does anyone have 2 front engine mounts gathering dust in their garage ? I'm struggling to get hold of a pair. If anyone could you bring them to the Concours on Sunday that would be brilliant, I'm more than happy to pay for the mounts + P&P if you are not coming to the event.
see you all on Sunday Cheers Simon.
|
|
|
Post by jocelyn on Jun 19, 2006 18:59:19 GMT
The engine are a cléon 'base. You could take the first engine fited in the twingo for example, this is the same. After this ,you have the 1108, the 12XX and the 1400 on the volvo 340. Regards. Ps, you must have the good clutch disk, that all, and the specifique carburation. After this you could fiting an injection if you want....everything is possible
|
|
|
Post by jocelyn on Jun 19, 2006 19:04:32 GMT
Excuses me, I'm just a French guys, and sometime I forgot that my english is not so good, my answer is totaly incorrect...... ;D
For the mounts, for me there are not the same.....
|
|
|
Post by jocelyn on Jun 28, 2006 10:52:05 GMT
there are hame for 55/66 and v66
|
|
|
Post by Simon66Coupe on Jun 29, 2006 7:02:39 GMT
Hi Guys, I've e-mailed Danny twice but I'm still waiting for a reply. I have also been to a Renault specialist and the mounts are not the same as on a DAF. I have gone through all the boxes of spares I have in the garage, and have found 1 front mount so I'm only looking for 1 now, but would prefer to replace with 2 new ones. I also found 5 rear engine mounts, so if any one needs a pair of rear mounts let me know. So once again if anyone has any Front engine mounts I would be more than happy to purchase them of you. Thanks Simon.
|
|
|
Post by Simon66Coupe on Jun 30, 2006 11:52:14 GMT
Paul, That would be brilliant, Many Thanks Simon.
|
|
|
Post by emerson on Aug 24, 2006 16:40:22 GMT
hi On my rally car, I replace the 2 front engine mounts by 2 nylon bushes with bolts passing through
The problem I had is that on a big braking, the engine came into the radiator so with my bushes, no more problem
You absolutely look if the drive shaft between engine and vario move freely (just with hand)
|
|