spunkymonkey
Likes DAFs
Currently waltzing Matilda
Posts: 3,482
|
Post by spunkymonkey on Jul 4, 2008 15:06:54 GMT
Does anyone happen to have, or know a supplier / alternative for, the little metal clips to hold the door cards on a 33? The driver's card was pop-riveted into ours but I'd rather use clips to replace it so it can be removed more easily in future if needed. Could probably make some up out of wire but I'm feeling lazy right now . Making one or two would be ok but the thought of bending up a dozen of them isn't exactly filling me with delight
|
|
|
Post by ericthered on Jul 4, 2008 19:02:51 GMT
i had a few missing from mine so had a look in a box of bits i have left over from other jobs and found a few. i am 99% certain they were morris minor clips i used, they are very slightly different but worked no probs. they are part no 260 from "woolies" the trim parts supplier, come in packs of 10, might be a pic on their site. www.woolies-trim.co.ukbest wishes, Eric.
|
|
spunkymonkey
Likes DAFs
Currently waltzing Matilda
Posts: 3,482
|
Post by spunkymonkey on Jul 4, 2008 20:19:34 GMT
Thanks Eric - they look just about spot on
|
|
|
Post by ericthered on Jul 5, 2008 10:37:53 GMT
glad you both found something of use , woolies are a great place for lots of stuff, they are the cheapest too and hold the most stuff, i have spent a lot of time looking at other suplliers and i think they get their stock from woolies Best wishes, Eric.
|
|