|
Post by Simon66Coupe on May 4, 2006 11:58:54 GMT
Does anyone Know if it's possible to replace the propshaft on a 66 without removing the engine ? The propshaft on the car has been cut and sleeved and is out of balance. I have a spare propshaft so for once spare parts aren't the issue. Is there some some special trick that that is only know by Variomatic Druids or ex mechanics that may help ?
|
|
|
Post by Simon66Coupe on May 11, 2006 11:21:31 GMT
Does anyone know if I remove the radiator, there's enough room to move the engine forward to get the propshaft off ?
Thanks Simon
|
|
|
Post by Simon66Coupe on May 12, 2006 11:44:19 GMT
Thanks for the thoughts, I'll start clearing some space in the garage. I'm going to replace the clutch as well, while I'm going to the trouble of taking the engine out. I'm not to sure what condition it's in and the old girls been off the road since 1994 regards Simon.
|
|
|
Post by shimon340 on May 14, 2006 23:07:08 GMT
so the propshafts arent like the volvo 340 ones then......
anyone know if the volvo 66 has an easy to remove propshaft?
cheers
|
|
|
Post by shimon340 on May 14, 2006 23:07:32 GMT
so the propshafts arent like the volvo 340 ones then...... ie easy to remove!!!
anyone know if the volvo 66 has an easy to remove propshaft?
cheers
|
|